login   |    register
AFV Club [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
Sd.Kfz.263 Panzerfunkwagen
Sd.Kfz.263 Schwerer Panzerfunkwagen (8 Rad), Initial/Early version
  • move

by: Venelin Golev [ VENKO555 ]


Originally published on:
Armorama

Introduction

The Sd.kfz. 263 Panzerfunkwagen (8Rad) is a heavy, but fast armored car for reconnaissance and communication. It is based on the chassis of earlier variant- Sd.Kfz.232 Panzerspahwagen. It is 8-wheeled car with omitted turret, instead a larger welded combat compartment was installed, to accommodate maps and radio equipment. It had also a square antenna and retractable one (umbrella type) on top of the vehicle, the armament consisted of only one machine gun with 750 rounds in front of the armored car for self-defence. A total of 207 were produced, issued mainly in reconnaissance or signal battalions in armored divisions.

Until now, there was no plastic kit of that rare vehicle in 1/35, but AFV Club filled that gap recently. It is based on their earlier Sd.kfz. 232 model, with new parts for the turretless top and the antennas.

Contents

The kit is in a standard box with nice box art, showing a desert camouflaged vehicle. In the box we have the following:
  • 8 sprues of tan styrene
  • 1 separate piece for the chassis
  • 2 separate pieces for the hull
  • 1 small clear sprue
  • 8 vinyl tires
  • 2 small vinyl sprues with driveshaft boots
  • 2 small photo etched frets
  • 1 small decal sheet
  • 1 instruction booklet
  • 1 poster size A4 with the box art

  • Sprue A: two pieces-with the elements of the wheels, suspension, levers, shafts etc
  • Sprue B: lower part of the hull, engine, other parts of the transmission
  • Sprue C: side parts of the hull, various hatches
  • Sprue D: mudguards, various boxes, exhausts, two shovels
  • Part I: one piece for the frame of the chassis, packed separately for preventing damage
  • Part E: two pieces for the main parts of the hull
  • SprueH: clear parts for headlights etc
  • Sprue L: parts for the two type of antennas
  • Sprue N: elements for the front shield
  • Sprue M: one part for the turetless top of the hull
  • Parts G1 and G2: photo etched frets
  • Part J: decal sheet
  • Parts T: vinyl driveshaft boots and tires

Review

The moulding of the parts is excellent with no flash and crisp details. Starting with the chassis we have a very detailed transmission and suspension (shafts, levers and so), which is workable in fact and the wheels can be positioned on uneven terrain, in dioramas for example. You should be careful though, because there are many tiny and fragile parts that can be easily broken. Theres basic engine, consisting only of the lower half, which is pity if you want to leave the engine hatches open. Two fuel tanks are also provided.
The next component is the hull-the lower part consists of a bottom and two sides. An angled frame is provided for correctly positioning and holding those parts. Theres an interior included, but no engine compartment, also no radio equipment is present, which is surprising considering this is a radio car. The top of the hull consists of three parts with nice details and weld representation. All hatches can be positioned open or closed should you decide to put some crew in the vehicle or interior to be seen. There are optional parts for building initial or early version.

Next step is building the wheels-each wheel is consisted of brake drum and hub carrier plus a vinyl tire. They can be positioned straight or turned; for ease of handling it is better not to put the assembled wheels in this stage. Mudguards are angled and have various tools and boxes stored on them. Theres also a flag pole on the front left mudguard-this was included only for initial production series vehicles. Front shield are also included-it is optional for some vehicles and has acceptable thickness, but if you want it can be replaced with photo etched one.

There are two types antennas included in the kit which are framed and umbrella type. They are very well represented, but attention is required because they are very fragile. The umbrella type may be positioned stretched, which will look pretty impressive once deployed. There are two small photo etched frets are included for various small bits.

The instructions are comprehensive, with all steps being very clear. The color chart has numbers for Gunze, Humbrol, Revell and Lifecolor paints. Four different camouflage options are provided, but in black and white type schemes-it would have been preferable to have supplied these in colour. The decal sheet is printed well, clear, with various crosses and markings.
  • 7th Pz.Div., Russia 1941 in overall German grey
  • 3rd Recon.Bn., 21st Pz.Div., Libya 1941 in overall Sandy yellow
  • 7th Pz.Div., France 1940 in overall German grey
  • 4th Pz.Div., Poland 1939 in overall German grey

Conclusion

I like this rare vehicle and AFV Club has done a very good job of representing it with crisp moulding and details. My only criticism is the omission of radio equipment for the interior (though with closed hatches this will not be noticeable) also the addition of some figures would have be nice. For me the icing of the cake is the umbrella type antenna, which fully deployed, will look rather impressive.
Highly recommended for the fans of that vehicle, but some modelling skills are needed.

SUMMARY
Highs: Excellent moulding. Detailed suspension and chassis. Wheels can be positioned straight or turned.
Lows: No radio equipment included if you decide to leave the hatches open. Again, some figures would be a nice addition, but it's personal preference.
Verdict: Very nice model and with fully deployed antenna which should look impressive.
Percentage Rating
89%
  Scale: 1:35
  Mfg. ID: 35263
  Related Link: 
  PUBLISHED: Jan 21, 2014
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 88.50%
  MAKER/PUBLISHER: 89.65%

About Venelin Golev (Venko555)
FROM: , BULGARIA

Started modelling as a child, my first model was a soviet tank. I've returned to modelling about 2 years ago and I'm still learning many new things and techniques. Main interest is armor/figures/dioramas in 1/35 scale and aviation in 1/48. In present I'm living in a small town in the Valley of the ...

Copyright 2017 text by Venelin Golev [ VENKO555 ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

great review ...This one will surely be added to my pile.. Thanks for the look inside the box. RICK
JAN 21, 2014 - 02:20 AM
Thanks! I like this vehicle and the kit is great. Cheers! Venelin
JAN 21, 2014 - 04:32 AM
I have just finished making this kit. The suspension is fairly tricky to complete accurately, fine of you want each wheel pointing in a different direction, but "woolly" if you want wheels aligned. Interior detail is very selective - steering gear and levers, but no ammo, crew equipment or small arms. Deployed antenna would be about a foot long, so star would last about 5 minutes, a wire replacement is a necessity.
JAN 21, 2014 - 10:23 AM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move