login   |    register
Cyber-Hobby.com [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

Built Review
135
Flak 30
2cm Flak 30 (limited edition)
  • move

by: Roman [ BIZARRE ]


Originally published on:
Armorama

Introduction

The 2cm Flak 30 was the primary anti-aircraft gun of the German Army from 1935, before the appearance of the Flak 38. Unlike the Flak 38, which is produced in styrene by almost every company, the Flak 30 was available only from ESCI/Italeri (developed in the middle of 1970s). This new release from Cyberhobby is definitely a big step forward from the ESCI offering, but as any other plastic model kit it is, unfortunately, not ideal.

contents

The kit comes in a cardboard end opening box with a typical Cyberhobby artwork on top (side view of the gun) and the kit features printed on the rear and sides. Inside there is 1 grey styrene sprue with 84 parts, 1 PE fret with 6 parts and a 4-page instruction guide.

The quality of the parts and molding are very good and comparable to recent Dragon Model offerings.

Review

Steps 1-3, the base, sight, gun assembly:
The triangular base-plate gun platform comes as one-piece thus eliminating the option to traverse the gun. The platform has nice detail with tread pattern. Separate parts include the trailer mounting arms, leveling pads with hand-wheels, gunnerís foot pedals and foot rests with tread pattern. To increase the detail a little bit there are several etched parts on the rim of the platform. Note that there are wrong part numbers called out for in the instructions(A65 should be A70, A49 should be A50).

The gun sight included is Linealvisier 21 and it is made up of 14 parts in total. Some of them are relatively thick and I hope there will be a resin or PE replacement available in the future. The crosshair is available in two variants Ė styrene and PE, and here the PE is an obvious choice. The instructions are very confusing since part A19 is not mentioned at all, but it is present on the drawings (see review images for assembly). Overall, this is the most difficult part of the assembly due to small parts and tight fit.

The 2cm gun barrel comes as one piece and has a hollow muzzle brake. Receiver, handles and an ammo magazine come as separate parts. As an option there is a PE part for the magazine mounting well if you want to show it open or increase the detail. The gun cradle builds without a problem, just be sure to fill the 2 pin marks on the elevation ark.

Steps 4-7, gun carriage and completion of the model:
The two separate side parts have fine detail and there are several parts to glue here. After the side panelsí assembly, the gun with the cradle is put in between and everything is glued to the base platform. The connection of the gun sight to part A27 on the left side panel is very tight and I simply cut one of the location pins on part A52. Due to the inability of the linkage arm to move afterwards you need to define the gunís angle in advance.

Several other parts are added here Ė front and rear plate, traverse hand wheel and a gunnerís seat. The seat has no location mark and I used the backside of the box as guidelines for the assembly (not only for the seat actually). Finally, there is a travel lock that can be glued in either combat or travel position.

Painting and markings:
No markings are included and there is only one painting variant Ė overall panzergrey at Eastern front in 1940 (where was that?!). Otherwise, since the gun was used from 1935 you can paint it in Reichswehr 3-tone camouflage or early war two-tone camouflage.

Conclusion

This is a nice small kit of the Flak 30 AA gun that can be finished within 1 day (I spent 2.5 hours on the build and review images). The model has nice detail and it is a big step forward from ESCI/Italeri but it is not ideal since it is not possible to elevate or traverse the model.

The frustrating part, in my opinion, is the instructions errors. They have nothing to do with the accuracy or feasibility of the model, but with the comfort of the modeller. I donít understand why the leader of the market (at least for Axis subjects) canít hire someone who would do a build up and control the parts numbers and instruction drawings before the kit is actually released. It doesnít take much time and I am sure there are a lot of people willing to do such a job (including me).

References:

Panzer Tracts No.22-1

Primeportal walkaround:
Primeportal
SUMMARY
Highs: Finally an up-to-date model of the Flak 30.
Lows: No traverse or elevation, no trailer. Instruction errors.
Verdict: Recommended.
Percentage Rating
80%
  Scale: 1:35
  Mfg. ID: 6722
  Suggested Retail: 22.99
  Related Link: Vendors page
  PUBLISHED: Nov 16, 2011
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 89.52%
  MAKER/PUBLISHER: 87.50%

Our Thanks to Dragon USA!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item   View Vendor Homepage  More Reviews  

About Roman (Bizarre)
FROM: AKERSHUS, NORWAY

Copyright ©2017 text by Roman [ BIZARRE ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Nice review, Roman, and the build shows what appears, at least to me, to be a pretty nice and "good-looking" representation of this early-war "icon". The gun certainly looks a lot cleaner and more-detailed than do those old Esci / Italeri things! Natch, I've done gone around with one of those to try and capture the details which appear "OOTB" here! So, from that, I look forward to getting either this C-H kit, or more likely the follow-up version with shields and trailer that Dragon is sure to put out. There's lots of things a guy could do with a decent Flak 30... and much quicker if he could just build a nice one from the box! I am very disappointed about the lack of traverse - that would seeming have been quite easy to do, as in the superb Dragon Flak 38 and Jaboschreck kits (which are of comparable small frame size and share a very similar mount base-plate). So, NO HATS OFF to the D from me for this laziness. Fortunately, someone out there (I must apologize for not having the citation to post here...) has already posted on a pretty straight-forward "cut and add" modification to solve this issue, but It's just sad that we'll have to go that extra step to get the desired traversed look. And, yeah, that markings-gaff about "east front" in 1940... a bit silly of D. Still, this thing soldiered all over Europe and north Afrika, so many paint schemes are possible. Bob
NOV 16, 2011 - 10:57 AM
Bob, I am glad that you like the review and most importantly give feedback. Thanks. I am sure they will use the molds for many models but then they won't fix the traverse I guess.
NOV 16, 2011 - 11:22 AM
The finished model. LINK" BORDER="0"> [http://www.network54.com/Forum/110741/message/1322179497/Flak+30] More images[/url]
NOV 25, 2011 - 07:47 AM
Model finished. More images here. http://www.network54.com/Forum/110741/message/1322179497/Flak+30
NOV 25, 2011 - 07:49 AM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move