login   |    register
Trumpeter [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
M198 155mm Howitzer
M198 155mm Howitzer (late version)
  • move

by: Seb Viale [ SEB43 ]


Originally published on:
Armorama

Introduction

The M198 howitzer is a medium-sized, towed, 155mm artillery piece developed for service with the United States Army and Marine Corps. It replaced the WW II vintage M114A2 155mm towed howitzer in the early to mid 1980ís. It can be dropped by parachute or transported by a CH-53E Super Stallion or CH-47 Chinook.

The M198 is deployed in separate corps- and army- level field artillery units, as well as in artillery battalions of light and airborne divisions. It also provides field artillery fire support for all Marine Air-Ground Task Force organizations. The M198 is being replaced by the BAE Systems Global Combat Systems M777 ultra lightweight howitzer, with deliveries underway. The M198 is also used by the Australian Army and the Pakistan Army.

Contents

This kit from Trumpeter comes in a 29.5 cm x 22cm x 5cm sturdy box with nice box art displaying an M198 in firing position. The kit contains 4 grey plastic sprues, 2 gun trails, PE fret, decal sheet, 4 vinyl wheels, two copper covers and finally the instructions and color guide. Total plastic parts are 205 pieces.

The A sprue contains the large base parts for the firing position of the howitzer, while the B sprue has the barrel, breech, muzzle and panels for the trails, mountings for the barrel, sights and other miscellaneous parts. The C sprue is the tire rims, suspension, hand wheels, handles and 155mm shells with fuse.

The details are crisp with no flash, and when ejector pin marks exist they are located in hidden places on the finished model.
The gun trails are molded in styrene, and the big box channel molding appears excellent with no molding imperfections, and in my review sample they are not bent or warped.

The other kit parts are the 4 vinyl tires. They are pretty well done with nice details embossed on the sides, and the tire pattern is nicely depicted without any seam line. The PE fret contains 9 parts with the gun cover and small handles.

The kit includes a 12 page black and white instruction manual. There are 17 total steps to the assembly of the kit. You decide to represent the gun in the firing position or in transport mode, with the choice of having the gun at 6 or 12 oíclock.

Also included is the typical color guide from Trumpeter, a nice and neat way to help the modeler decide which color scheme to use as well as showing the decal placement. You have the choice between the 3-NATO scheme and overall sand.

Review

The build seems really straightforward. The kit is dimensionally accurate and the small details are well depicted. As an example, the tire hub is well done and the inflation tub is also presented. Due to the dimension of the gun, an aluminum one would have been a better choice for this kit. This is one main drawback; we will see on the build blog if the seam line is visible or not. Moreover, the breech cannot be open and no detail is present here. The optics are finely represented. On the double baffle muzzle brake, be prepared to do some work to remove the horrible seam line inside and outside the piece.

Trumpeter provides some extras in the kit, such as the eight 155mm shells equipped with fuse and a loading cradle.

Conclusion

The kit has a great level of detail, is dimensionally correct and it seems really easy to build. Be ready to do some extra work if you choose to depict the gun in the firing position, since the breech cannot be opened and the lack of any details in this area. You donít have the choice regarding the equipment used in firing position: aiming stakes are glued with their racks on the gun trail as well as the small box that contain the Panagraphic Telescope.

Concerning the travel mode, you have the choice of either a 12 or 6 oíclock position, but concerning the prime mover, you donít have much choice. The army usually uses the M1083 and the Corps the MRTV, neither of these vehicles are currently available in 1/35. So, knowing what you are dealing with; you cannot depict the gun in firing position without work and in travel position you donít have a prime mover.

Moreover, the absence of aluminum barrel is quite striking and the level of detail on the gun muzzle brake is pretty low.

The author thanks Gino Quintiliani for his help regarding artillery vocabulary.
SUMMARY
Highs: Nice details and easy build.
Lows: Impossible to depict the gun in firing position without extra work.
Verdict: It should be an easy build. The kit has great details but the display option is limited and it is hard to do an OOB.
Percentage Rating
80%
  Scale: 1:35
  Mfg. ID: 02319
  Suggested Retail: $44.95 USD MSRP
  Related Link: 
  PUBLISHED: May 09, 2010
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.06%
  MAKER/PUBLISHER: 84.63%

Our Thanks to Stevens International!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Seb Viale (seb43)
FROM: PARIS, FRANCE

Back to Europe, I am living in Paris since december 2011 with my Wife. We have a nice 6 years old daughter, and a 3 years Baby boy. I am doing AFV modern era. I started when I was a teenager , back to business after 10 years of break due to Sport (Baseball, yes european plays baseball) and Unive...

Copyright ©2017 text by Seb Viale [ SEB43 ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Good review. One update/correction though. You state... "...concerning the prime mover, you donít have much choice. The army usually uses the M1083 and the Corps the MRTV, neither of these vehicles are currently available in 1/35....in travel position you donít have a prime mover." This is only for the latest versions. Prior to the MRTV and M1083, both the Army and USMC used M923/M925 5 ton trucks as the prime mover. The Italeri kits are perfect for this. I did one a while back using the Italeri M923A1 and the Airmodel M198.
MAY 09, 2010 - 04:40 PM
Thanks Gino for your help Concerning the prime mover, you are right but the gun is a last version one. I hope that Trumpeter is listening ??? Gao any comments on the M1083 and MRTV Cheers Seb
MAY 09, 2010 - 04:51 PM
The upgrades to the "late" version gun as Trumpeter has labeled it were made in the mid-late '90s. So it is still appropriate for it to be pulled by an M900 series truck.
MAY 09, 2010 - 05:07 PM
I believe one of the OOP KMC/ Warrior M109 Update sets had a collimator- the only one I've seen in plastic or resin. Aiming Stakes should be easy to make. LINK
MAY 11, 2010 - 01:38 AM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move