login   |    register
Trumpeter [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
B1 Centauro
B1 Centauro AFV Early Version (2nd Series)
  • 0001116

by: Keith Middleton [ KBM ]


Originally published on:
Armorama

introduction
The Centauro B-1 tank destroyer is an 8 x 8 wheeled heavy armored car used by the Italian Army. The Centauro is armed with a 105mm gun and two 7.62mm machine guns, one mounted on the turret and the other co-axially with the main gun. It has a two man crew and is capable of carrying four additional soldiers if the ammunition load for the main gun is reduced. The Centauro has been deployed for peacekeeping duties in Somalia and former Yugoslavia.
Kit Contents
The kit is packaged in a sturdy cardboard box. In addition, the two hull parts are encased in a separate cardboard sleeve providing additional protection during transit.
In addition to the hull parts, the box contains six sprues and a separate turret top half molded in light gray plastic, a clear sprue with the vision blocks, a small sprue of poly caps, a small sheet of photo-etched parts, a length of metallic looking thread, a small decal sheet, and eight vinyl tires. With the exception of the hull parts, each of these was individually wrapped in plastic.
There is also a 16-page instruction booklet. There are a total of 385 parts in the box. An examination of all the parts did not reveal any sink marks or mold extraction points in visible locations. In addition, there was no visible flash. Overall I am impressed with the finely rendered detail in all the parts.
The decal sheet is well done with all of the decals in register. However, there is a great deal of carrier film on some of the markings. Finally, unlike some of Trumpeter’s other modern armor kits, there are no figures included.
The instructions take the form of line drawings with 19 clearly explained steps. Based on a quick review of the instruction booklet, there appear to be no unused parts in the box. Finally, a front and back color sheet with painting and marking instructions for two vehicles is included.
There are no unit identifications provided. Both vehicles are overall olive drab. Color codes are provided for Gunze Mr. Hobby, Vallejo, Model Master, Tamiya, and Humbrol paints.
Turret
The turret is molded in two parts and a quick test of the fit revealed a perfect fit with no gaps. Also, the weld seams are well done on the turret and mantlet without being overdone.
The modeler will have to drill 16 holes in molded location points.
There is no interior detail, so the Centauro will have to be built with the turret hatches closed or appropriate Italian crew figures will have to be located and used to fill the openings.
The hatches have some interior detail if one chooses to leave them open.
The gun barrel comes in two parts and comes with the thermal sleeve molded as part of the detail. There are nicely rendered straps as well. The muzzle brake (fume extractor?) also comes as two parts that goes over the barrel once you have added an inner photo ethced perforated sleeve. Having some experience at trying to bend round shaped pe, this might prove problematic. Unfortunately the modeler is not provided an alternative to the pe sleeve.
The turret mounted M3 machine gun is also very well done. Finally, the kit comes with a plastic “canvas” screen that covers the connection area between the mantlet and turret. This is appropriately thin and has wrinkles molded in.
Hull
As already mentioned, the hull comes in two parts. Once again, a test fit revealed no gaps.
The upper hull has anti-skid surfacing texture.
The tools are nicely detailed and all have the clasps molded on with locating pins. The detail is good, but if the modeler desires to replace the clasps with pe straps, these will have to be removed. Also, there are locating holes for each tool in the hull.
As far as the lower hull is concerned, the suspension is fixed so anyone wanting their Centauro to have articulating suspension will have to perform major surgery. Also, the modeler is instructed to sand off rather prominent bolts(?) on parts E7 and 8. Finally, there is again no interior detail.
Wheels and Tires
The wheels come in two parts and are assembled around the poly caps. The tires are vinyl. While they have good tread detail and no apparent mold seams, I would prefer hard plastic tires.
Conclusion
This looks like an impressive kit of a modern well-armed armored car. I rate it at 9 out of 10. I mark it down for two main reasons: the vinyl tires and the lack of crew figures.
SUMMARY
Highs: The detail is very well done and the parts have absolutely no flash. The instructions are well drawn and present an orderly and clear construction process.
Lows: I mark it down for two main reasons: the vinyl tires and the lack of crew figures.
Verdict: This looks like an impressive kit of a modern well-armed armored car and I am looking forward to building it...at some point in the future after I complete several ongoing projects.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: 00386
  Suggested Retail: Unknown
  Related Link: 
  PUBLISHED: Apr 01, 2009
  NATIONALITY: Italy
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 86.67%
  MAKER/PUBLISHER: 84.63%

Our Thanks to Stevens International!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Keith Middleton (kbm)
FROM: TEXAS, UNITED STATES

Copyright ©2017 text by Keith Middleton [ KBM ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Thanks for this review Shaun. I have heard the hull and turret are mis-matched in that the short hull version was never fitted to the Italian updated turret (the added armor package). I had also heard the Italian government never exported the updated turret either. I am hoping the last kit in this series is indeed the long hull with the updated turret. Do you know, or have you heard about these discrepancy? This is not a deal breaker, but inquiring minds want to know. I have been drooling over this kit ever since I heard of it's release.
APR 01, 2009 - 07:59 PM
Mark, The thanks need to go to Keith Middleton. All I did was a quick edit. I am sure he can answer your questions. Shaun
APR 02, 2009 - 07:54 AM
Team Effort - thanks to both of you then. Same question addressed to Keith then. Mark L.
APR 02, 2009 - 08:57 AM
The kit has the correct turret. What you describe is the turret of the first series. The turrets of first and second series share the same "short" hull. Turrets of the second series are also used on the "long" hull, which is called the third series. Thomas
APR 02, 2009 - 12:49 PM
The slotted device on the end of the gun tube is indeed the muzzle brake. The fume extractor (or bore evacuator in US parlance), is the tube immediately in front of the mantlet.
APR 06, 2009 - 02:10 PM
I hope you will be pleasantly surprised to learn that both of those rumors are false. The MIKREX applique armour panels were added to the series 2 (short hull) Centauro in response to lessons learned during the UN mission in Somalia. The MIKREX armour became a standard fitting on series 3 (long hull) vehicles, and on the VRCC-105 exported to Spain (the bulk of those were manufactured under license in Spain ... although I may be confusing this with the Leopard 2E procurement program). Another modification carried out on the Italian vehicles was the inclusion of a laser warning receiver system coupled with Galix smoke dischargers. This mod has be retro-fitted to Series 2 vehicles, and I believe it is standard on Series 3 production Cent's. It should be noted that in general any Series 2 vehicle having the Galix system will have had the MIKREX kit installed previously. Cheers - Dan
APR 08, 2009 - 11:18 AM
So which (Trumpeter) version do I need to buil a vehicle used in Somalia? Is the kit marked as a spanish version basicaly an italian version with spanish decals? http://bunker.altervista.org/pasta.html Thanks in advance.
MAY 11, 2009 - 12:16 PM
Marc, See my post and the links in my answer to your question about the Somalia deployed Centauros on Missing Lynx.... http://www.network54.com/Forum/47209/thread/1242062270/Trumpeter+Centauro+kit+for+Somalia- Have a read of the VRC-105 review....there are some minor differences between the Spanish and Italian versions. http://www.armorama.com/modules.php?op=modload&name=SquawkBox&file=index&req=viewtopic&topic_id=129399
MAY 11, 2009 - 01:45 PM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • 003513
  • 003414
  • 003315
  • 003245
  • 0031101
  • 003014
  • 002916
  • 002815
  • 002717
  • 002616
  • 002515
  • 002418
  • 002319
  • 002273
  • 0021105
  • 002020
  • 001924
  • 001826
  • 001727
  • 001630
  • 001437
  • 000853
  • 001366
  • 0012115
  • 0011134
  • 001058
  • 000953
  • 000666
  • 000569
  • 000478
  • 000387
  • 000285