login   |    register
Plus Model [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
Engine Detail Set
Engine Compartment Detail Set - Opel Blitz (Tamiya)
  • 000184

by: Mike High [ TACFIREGURU ]


Originally published on:
Armorama

introduction
Plus Model, based in the Czech Republic, have released a 1/35th scale Engine Detail set for the Tamiya Opel Blitz (Tamiya # 291 - German 3-ton 4x2 Cargo Truck).
Contents
The kit arrived in a small 3.5 x 4.25 x 1.5-inch thin cardboard box. Inside the box, the materials of the kit are protected by a bubble-bag. The resin parts are in their own plastic bag and the photo etch fret is sealed in another bag, and protectively backed by a piece of cardboard. There are 34 parts cast in gray resin, 26 PE parts, one piece of heavy brass wire for the radiator supports and hood/bonnet braces, and one piece of thin lead wire for the plug wires.
The Kit Parts
The resin is crisply cast showing very nice, sharp details. These parts, with the exception of two, are for the engine and the detail items for the engine compartment firewall. Each part is clearly identified by number on the casting blocks. Flash and seam lines are minimal so clean-up will be straightforward. Two very fine parts (#38 hood/bonnet latches) in my sample were broken but will be an easy fix with some thin wire (and something I've become accustomed too when working with resin kits and conversions - regardless of company). The use of a razor saw will be the best way to remove the parts from the casting blocks.

There are two resin pieces that, in my opinion, will greatly save time and frustration while forming the hood/bonnet halves - forms for the PE! These forms, both a left and right hand side, are designed to aid in giving these halves a proper bend. I'm inclined to believe that a little additional "tweaking" will be necessary, but there will be considerably less hassle during this step.

The PE parts are well defined with exceptionally small attachment points. These parts make up the hood/bonnet, braces, latches, fan, fan belt(!), part of the firewall, et cetera.

The instruction sheet is broken down into nine steps. Each step clearly covers a process in the build/conversion. The only surgery needed on the donor kit will be to remove a portion of the frame from Tamiya's part #C1 in step 1. The instructions are quite clear where each part goes, give or take a little wiggle room. Step 9 covers the forming of the hood/bonnet halves and also has the builder form the louvers. Care and support of each half will be needed while doing this.
Conclusion
Plus Model has done an excellent job of creating a well detailed engine compartment for the Opel Blitz. Modeler's desiring to "open up" the hood will now have something nice to show under there.
SUMMARY
Highs: Very nice castings with sharp detail. Forms to aid in bending the hood/bonnet halves.
Lows: Two small resin parts broken.
Verdict: An excellent and very detailed engine compartment for the Tamiya donor kit.
Percentage Rating
93%
  Scale: 1:35
  Mfg. ID: 313
  Related Link: 
  PUBLISHED: Feb 13, 2009
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 88.85%
  MAKER/PUBLISHER: 85.48%

Our Thanks to Plus Model!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Mike High (TacFireGuru)
FROM: COLORADO, UNITED STATES

Like most, I started out in my young years; building Monogram armor and aircraft. Joining the Army at 17 in 1981 put a stop to my building for many years, I retired in 2001 and ran across Armorama....I've been re-hooked since. I'm a notoriously slow builder and seem to have more than one buil...

Copyright 2017 text by Mike High [ TACFIREGURU ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Nice to see both the item and the review for this work horse of soft skins.
FEB 13, 2009 - 12:58 PM
I finally found this kit to order...sadly from overseas. I'd like to get another, but yikes, so expensive. Any ideas where to order US based? Also, any feedback on how this compares to the Verlinden kit?
JUN 09, 2012 - 11:28 AM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • 000742
  • 000646
  • 000547
  • 000453
  • 000362
  • 000257