login   |    register
Dragon Models [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
US Army Tank Riders
US Army Tank Riders 1944-45
  • 000112

by: Pat McGrath [ EXER ]


Originally published on:
Armorama

Introduction
This set has been on Allied modelers wish lists for a long time. True there are some US tank riders in resin, but what has been needed is an affordable set in plastic.

Whatís in the box
This is a four figure set made using Dragonís Gen2 technology. There are 6 plastic sprues in the box. The two large sprues contain the parts for the figures. One sprue is for the additional equipment and three weapon sprues. Also included is an etched brass fret containing helmet straps and weapon slings. The instructions are one sheet with colour views by Ron Volstad of the back and front of each figure showing where each part goes.

The figures depicted are 3 riflemen and a BAR gunner, two kneeling, two sitting with one leg outstretched. They all wear the M43 Combat Uniform and two buckle boots. There is disputed evidence of the M43 tunic's use in the Normandy campaign as it had been released to some units in Italy in late 1943 so some may have found their way to troops in Normandy. It wasn't seen in great numbers in the ETO until September of '44 and it never fully replaced the M41 Parson's jacket by the end of the war.

Each of the riflemen has a bandoleer of ammunition as well a rifle belt and suspenders and a gas mask bag slung as a haversack. The BAR gunner is provided with a BAR ammunition belt.

The figures are made up of 19 separate parts each, that is before adding the helmet or any equipment. The breakdown of parts is as follows: the torso is made up of two parts Ėfront and back, a separate collar for the tunic and separate shoulder straps, the usual two part Gen2 head and separate arms and hands. The skirt is made up of four separate parts; the legs are also separate with two separate boots. There are mold seam lines but they don't look too prominent.

The inclusion of the two part head common to Gen 2 sets has always been a mystery to me. The separate parts donít add any detail and cleaning up the seam has seemed too much trouble when there are replacement heads available. On other sets the helmet strap can be used to disguise the seam but US soldiers never seemed to wear their chinstraps down so I guess Iíll be replacing these too.

Equipment
The equipment is provided in separate pieces and there is plenty of it. On the figure sprues each figure is provided with an M1 helmet covered with a small mesh helmet net, though the net detail is not as sharp as the CAD image on the box side would lead you to believe. The ammo bandoleers come in three separate pieces. The gas mask bags and entrenching tools are also on the sprue. The bayonets provided seem to be of the Mark Four type designed for the M1 carbine and not the longer bayonet for the Garand. There are also fragmentation and smoke grenades on the figure sprue.

The rest of the equipment comes on a separate sprue, is all nicely molded with minimal seams and sharp detail and includes canteens, aid pouches, and what look like shotgun pouches to me. Also provided are alternative ammunition pouches including Thompson pouches, M1 carbine, and pistol ammunition pouches as well as three holstered Colt .45s. There are also 6 spare M1 helmets without netting.

The rifle ammo and BAR pouches come as separate pieces to be glued along side each other on the figures belt. The problem with this is that they always sit proud of the surface and allowance is made for fitting them to the torso. In one way this is good in case the modeler chooses to leave them off he has no filling to do but if he chooses to fit them he may have some carving to do to make them sit naturally.

Weapons
The weapons provided are four Garand rifles with separate open or closed breeches. Each rifle comes with six separate ammo clips. There is a nicely detailed BAR with two separate magazines and two separate handles to show it raised for carrying or lowered to the side. The BAR also has a three piece bi-pod but most BAR gunners seemed to remove the bi-pod in service. We also get an M1 carbine with six separate magazines and a Thompson SMG with two detailed magazines.

Finally to the etched fret of slings and straps; although the parts are numbered, no information is given on the instructions as to how they go together so the modeler with have to pay particular attention to his references.

Conclusion
This is a very good and useful set and with a bit of ingenuity and spare parts the modeler can do a lot with these figures. I hope to do a full build feature with these figures soon so we'll see then how they go together.

Click here for additional images for this review.

SUMMARY
Highs: Choice of subject and level of detail.
Lows: The high number of parts per figure may be ff putting for some modelers. Two part heads need careful aligning. No instructions for etched straps and slings.
Verdict: A good realization of a long awaited subject.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: 6378
  Suggested Retail: $15
  Related Link: 
  PUBLISHED: Jul 26, 2008
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.05%
  MAKER/PUBLISHER: 86.23%

About Pat McGrath (exer)
FROM: DUBLIN, IRELAND

I served three years in the Irish Army. Then I studied fine art for five years. Acted professionally since leaving college (Look me up on IMDB- Pat McGrathIII) Interested in Allied Armour 1942-45 and German SPGs. Other interests are figures and Sci Fi models

Copyright ©2017 text by Pat McGrath [ EXER ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Good review Pat, lots of info on the breakdown which is very helpfull. Will need at least 3 sets for future projects. About time some one started to catch up on allied figures. Very sorly needed and I'm happier than a apple in a pie.
AUG 03, 2008 - 05:17 PM
I got got my set from greatmodels, they are very nice. I its also really nice that they included PE for the rifle straps. I do agree with the commentary about the guys kneeling. However, they two kneeling guys are perfect for a scene I'm working on from a picture in the book that accompanied the PBS series "The War". The pictures is of two soldiers hiding behind a Sherman, probably taking cover from enemy fire.
AUG 09, 2008 - 01:47 PM
Pat good review. To those who currently have the set, what do you think of the three part facial construction process? Is there any fill required? DJ
AUG 09, 2008 - 04:52 PM
I'm also having trouble with the slings. Not so much the handling of the photoetch, which I can do, as the actual assembly instructions. The M1 slings, for example, seem to consist of about two or three different photoetch parts: a strap with holes, a strap without holes, and a buckle. This is really only a guess, however. Can anybody offer any insight on how these parts are supposed to fit together?
SEP 28, 2009 - 12:46 PM
hope that helps
SEP 28, 2009 - 11:24 PM
a few more photos off the web: Web slings for M1 and 03. M1 carrying case and leather sling: Leather sling: Nice M1 google M1 rifle slings
SEP 28, 2009 - 11:42 PM
Hi dave, Thanks for the pictures, very useful. I was looking at the price of these chaps they come in at over pounds 3.50 each. Nice set though. Al
SEP 29, 2009 - 10:51 AM
That is helpful. Thank you. Not sure how I'll turn two photo etch straps into a one piece sling, but at least now I have a clear idea what I'm supposed to end up with.
SEP 29, 2009 - 02:39 PM
A neat idea would be have the two guys sitting on the back of the "ersatz" M-10, while the other two are keeping watch at the end of a bridge, or perhaps laying mines. fake road signs, or trip-wires? Could make an interesting mini-dio....
SEP 29, 2009 - 10:15 PM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • drawing_10
  • drawing_009
  • 11220
  • 07147
  • 00810
  • 00770
  • 00683
  • 00594
  • 00484
  • 00387
  • 00298
  • 001154
  • Untitled-120
  • 4209
  • 13168
  • 3278