login   |    register
Dragon Models [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
Panzerkampfwagen VI(P) Sd.Kfz.181

by: Vinnie Branigan [ TEACHER ]


Originally published on:
Armorama

introduction
The Panzerkampfwagen VI(P), although a true Tiger variant, is often overlooked in favour of it's more famous siblings. The major reason for this of course, is that there was possibly only ever one example fielded, although hulls were used later to make the Ferdinand and Elephant. Dragon have provided this one option in the kit as the one supplied to sPzJgAbt 653, on the Eastern Front in 1944. Dragon released the original kit as 6210 in 2004, with the same marking option, and now presents the updated Premium Edition as kit number 6352.


the kit
It's another of those ones that you can't get back in the box once you've unpacked everything. Dragon card on top, showing the busy looking photo etched fret, the black vac-formed tray with the aluminium barrel and other machined 'goodies'. I was going to get all my Tiger books out and start pouring through the references..............then I noticed that David Byrden gave Dragon Technical assistance. Along with Tom Cockle and Gary Edmundson, so if I did find any mistakes, it would probably be my books that were at fault! I'll confine myself to the model! The model comes as 10 large sprues, and 10 small sprues of light grey styrene, a transparent sprue, hull, mantlet and cupola. There's a decent sized PE fret, from the Lionroar stables as we all know now, a length of metal tow rope, and two bags of 'Magic Tracks'.


premium improvements
I have to say, in a direct comparison, the sprues in this kit are much sharper than the original release, even when the parts haven't been re-tooled. So new tools must have been produced for these kits, even where there is no change on the sprue. Having said that, there are a lot of changes. Sprue A which holds the main hull deck has some minor re-tooling, firstly, part 33 the cupola hatch, has been retooled with a circular cut out for the Rabbit's Ears scope that's supplied. Also the large insert that formed the rear of the turret in the original release has now gone, and in it's place we have a new cupola. There is also another sprue 'A', which is the smaller one from the Tiger I kit holding the gun breech and associated parts, these not being part of the original release. Sprues E (drive sprockets) and F (road wheels) are the same as in the original release, as is the main hull moulding. Sprue B is also the same, although most of this sprue is not actually used, so there's plenty for the spares box!

Sprues H (fenders), K (front hull), H (mud flaps) and L (turret bin) are the same as the original release, but sprue C has had some major retooling. Some parts have disappeared, for example the opaque periscope ring for the cupola, and in it's place we now have a brand new escape hatch for the turret, along with new parts to form the cupola. The 2 piece barrel is no longer an option, and in it's place on the sprue we now have a new right side for the turret, which will take the large escape hatch. In fact, there's also another right side for the turret, without the escape hatch, which I presume is for the prototype. All 3 supplied sides have been retooled. In addition to the changes outlined above, this is of course, a Premium Edition kit, and therefore there are lot's of extras included. An aluminium barrel is supplied, along with a lot of extra smaller sprues, that originated in more recent Dragon releases. Sprue TB has a new highly detailed jack, sprue L is a transparent one holding periscopes, and a highly detailed machine gun for the co-driver is supplied on J. TE holds those tiny Little padlocks that first made their appearance in the Panzer IV series, and TA holds a set of on vehicle tools without any moulded on clamps. Sprue E has all the parts for a rabbit's ears scope, and TC has the slide-moulded towing eyelets. Lastly TH has a new hinge assembly for the loader's hatch.

The vac-formed tray holds pre-bent pins for detailing the front and rear mud flaps, although to use these you will need to remove some moulded on detail. Also in the tray are two brackets for the smoke discharger's, which were fitted, although the actual smoke discharger's themselves weren't. There's also a spring, which is used if you wish the gun to be able to recoil.........seriously. Lastly, from the tray, there are two frames for making the grills over the exhaust fan grating on the engine deck. More on these later.

The PE fret supplied, is of course from the Lionroar stable, and in fact, although the parts have been re-arranged, most of them are identical to the parts on the Lionroar upgrade set #35044. There are replacements for the fender supporting brackets, new tool clamps, mud flap hinges, although to use these, as mentioned earlier, you'll have to remove the moulded on ones, new grills for the intake fans, latches for the turret bin, and of course, those grills for the exhaust fan grating. Now these are constructed in exactly the same way as the Lionroar set, i.e. the thin copper wire frame is used first, and the PE frameless grill is fitted to this.............carefully. It is the best way to achieve the correct look, but it won't be easy to construct, especially if you don't have soldering skills. Lastly, also on the PE fret is a basket-like structure, that I can only presume is an antennae protector, since the Tiger P supplied to Abt 653 was a command vehicle. This is fitted to the turret roof, just behind the cupola. Lastly, the tracks. These are the corrected Magic Tracks as supplied in the Premium Edition Elephant, i.e. they have the chevrons the correct way around. The original vinyl tracks in this kit also had them the correct way, as did the box art illustration. The box art for this kit has them on the wrong way around though, so take care that you don't use it for reference when you're fitting yours!


marking options
There aren't any. One scheme is shown, the same as that in the original kit, since this is the only one presumed to have been fielded, a tri-colour scheme, number 003 of sPzJgAbt 653, Eastern front, late summer 1944.


conclusion
I can't help it, I love these premium edition kits! As shown with this example, new research means the kit can be updated to reflect this new knowledge, and lot's of photo etch, metal barrels and other goodies, all for a very reasonable price indeed! Very highly recommended!
SUMMARY
In effect, a great new kit, with lot's of extras at a great price!
  EXTRAS:90%
  MOULDING:95%
  SUBJECT:90%
Percentage Rating
96%
  Scale: 1:35
  Mfg. ID: 6352
  Related Link: Dragon Models Ltd.
  PUBLISHED: Aug 19, 2006
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.97%
  MAKER/PUBLISHER: 86.23%

Our Thanks to Dragon Models!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

Photos
Click image to enlarge
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
About Vinnie Branigan (Teacher)
FROM: ENGLAND - NORTH WEST, UNITED KINGDOM

Copyright 2017 text by Vinnie Branigan [ TEACHER ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of TankRat's. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

My fault, Vinnie. That one got past me - pressure of time. Just ignore part C21. Is there a metal part M30 supplied for the loader's hatch? David
AUG 19, 2006 - 10:06 PM
so if I'm reading this correctly, You can build the prototype version?? WC
AUG 19, 2006 - 10:12 PM
No Ben, it can't. Thanks David, no metal part such as you describe? There is a small PE part MA 30, Yep, I've just checked again, and yes it is included, it's the hinge for the piston assembly on the hatch. Vinnie
AUG 19, 2006 - 10:15 PM
Thanks Vinnie... I feel part of me just died... WC
AUG 19, 2006 - 10:30 PM
Ben: the prototypes turret roof was lower, so you would need a new roof and new turret sides as well. I'm sure that Ferdinand experts would point out many differences in the hull also. Vinnie: that part should not exist. I think someone at Dragon misread a diagram. David
AUG 19, 2006 - 10:37 PM
so gentlemen, would the turret of the Italeri's version be accurate? By using the Italeri's turrent and DML chassis will I be able to build an accurate version of the prototype? WC
AUG 20, 2006 - 07:32 AM
Well, Benjamin, I can only speak about the turret. But I know that the hull in this kit has additional frontal armour that was not present on the prototypes. The hull cannot be assembled without the armour. The Italeri turret has the unusual roof that the prototype requires. However it's from a previous generation of kits and doesn't have the fine accuracy of this Dragon kit. In particular the turret is not asymmetric. David
AUG 20, 2006 - 08:59 AM
Slightly off topic, but I've gotten into the habit of drawing a packing diagram for Dragon kitsets; the first time I open the box I draw a rough diagram of where each sprue tree is in the box, and work my way down layer by layer - saves spending a valuable half-hour trying to figure how how to get everything back in! I wonder whether Dragon could consider incorporating a set of packing instructions?? Jeff W.
AUG 20, 2006 - 11:55 AM
Jeff, they already did although it was a bit tongue in cheek! Search their site, I'm sure you'll find it! Vinnie
AUG 20, 2006 - 12:13 PM
Tip: Just hit enter to submit your reply!
   
What's Your Opinion?


Photos
Click image to enlarge
  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
  • 08
  • 09
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16